Cypress CY7C1338G - Manual (Page 15)

CY7C1338G
Document #: 38-05521 Rev. *D Page 15 of 17
Ordering Information
Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
visit www.cypress.com for actual products offered.
Speed
(MHz) Ordering Code
Package
Diagram
Part and Package Type
Operating
Range
133 CY7C1338G-133AXC 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1338G-133BGC 51-85115 119-ball Ball Grid Array (14 x 22 x 2.4 mm)
CY7C1338G-133BGXC 119-ball Ball Grid Array (14 x 22 x 2.4 mm) Lead-Free
CY7C1338G-133AXI 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free lndustrial
CY7C1338G-133BGI 51-85115 119-ball Ball Grid Array (14 x 22 x 2.4 mm)
CY7C1338G-133BGXI 119-ball Ball Grid Array (14 x 22 x 2.4 mm) Lead-Free
100 CY7C1338G-100AXC 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1338G-100BGC 51-85115 119-ball Ball Grid Array (14 x 22 x 2.4 mm)
CY7C1338G-100BGXC 119-ball Ball Grid Array (14 x 22 x 2.4 mm) Lead-Free
CY7C1338G-100AXI 51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free lndustrial
CY7C1338G-100BGI 51-85115 119-ball Ball Grid Array (14 x 22 x 2.4 mm)
CY7C1338G-100BGXI 119-ball Ball Grid Array (14 x 22 x 2.4 mm) Lead-Free
Package Diagrams
NOTE:
1. JEDEC STD REF MS-026
2. BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH
MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE
3. DIMENSIONS IN MILLIMETERS
BODY LENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH
0.30±0.08
0.65
20.00±0.10 22.00±0.20
1.40±0.05
12°±1°
1.60 MAX.
0.05 MIN.
0.60±0.15
0° MIN.
0.25
0°-7°
(8X)
STAND-OFF
R 0.08 MIN.
TYP.
0.20 MAX.
0.15 MAX.
0.20 MAX.
R 0.08 MIN.
0.20 MAX.
14.00±0.10
16.00±0.20
0.10
SEE DETAIL
A
DETAIL A
1
100
30
31 50
51
80
81
GAUGE PLANE
1.00 REF.
0.20 MIN.
SEATING PLANE
100-Pin TQFP (14 x 20 x 1.4 mm) (51-85050)
51-85050-*B