beautypg.com

Cypress CapSense CY8C20396 User Manual

Capsense™ applications, Features

background image

CapSense™ Applications

CY8C20x36/46/66, CY8C20396

Cypress Semiconductor Corporation

198 Champion Court

San Jose

,

CA 95134-1709

408-943-2600

Document Number: 001-12696 Rev. *D

Revised March 17, 2009

Features

1.71V to 5.5V Operating Range

Low Power CapSense™ Block

Configurable Capacitive Sensing Elements

Supports Combination of CapSense Buttons, Sliders,
Touchpads, Touch Screens, and Proximity Sensor

Powerful Harvard Architecture Processor

M8C Processor Speeds Running to 24 MHz

Low Power at High Speed

Interrupt Controller

Temperature Range: -40°C to +85°C

Flexible On-Chip Memory

Three Program/Data Storage Size Options:
• CY8C20x36: 8K Flash / 1K SRAM
• CY8C20x46: 16K Flash / 2K SRAM
• CY8C20x66: 32K Flash / 2K SRAM

50,000 Flash Erase/Write Cycles

Partial Flash Updates

Flexible Protection Modes

In-System Serial Programming (ISSP)

Full-Speed USB

Available on CY8C20396 and CY8C20666 Only

12 Mbps USB 2.0 Compliant

Eight Unidirectional Endpoints

One Bidirectional Control Endpoint

Dedicated 512 Byte Buffer

Internally Regulated at 3.3V

Precision, Programmable Clocking

Internal Main Oscillator: 6/12/24 MHz ± 5%

Internal Low Speed Oscillator at 32 kHz for Watchdog and
Sleep Timers

Precision 32 kHz Oscillator for Optional External Crystal
(CY8C20x46/66 only)

0.25% Accuracy for USB with No External Components
(CY8C20396 and CY8C20666 only)

Programmable Pin Configurations

Up to 36 GPIO (Depending on Package)

Dual Mode GPIO: All GPIO Support Digital IO and Analog
Input

25 mA Sink Current on All GPIO

Pull up, High Z, Open Drain Modes on All GPIO

CMOS Drive Mode(5 mA Source Current) on Ports 0 and 1:
• 20 mA (at 3.0V) Total Source Current on Port 0
• 20 mA (at 3.0V) Total Source Current on Port 1

Selectable, Regulated Digital IO on Port 1

Configurable Input Threshold on Port 1

Hot Swap Capability on all Port 1 GPIO

Versatile Analog Mux

Common Internal Analog Bus

Simultaneous Connection of IO

High PSRR Comparator

Low Dropout Voltage Regulator for All Analog Resources

Additional System Resources

I

2

C™ Slave:

• Selectable to 50 kHz, 100 kHz, or 400 kHz
• No Clock Stretching Required (under most conditions)
• Implementation During Sleep Modes with Less Than

100 µA

• Hardware Address Validation

SPI™ Master and Slave: Configurable 46.9 kHz - 12 MHz

Three 16-Bit Timers

Watchdog and Sleep Timers

Internal Voltage Reference

Integrated Supervisory Circuit

Complete Development Tools

Free Development Tool (PSoC Designer™)

Full Featured, In-Circuit Emulator and Programmer

Full Speed Emulation

Complex Breakpoint Structure

128K Trace Memory

Package Options

CY8C20x36:
• 16-Pin 3 x 3 x 0.6 mm QFN
• 24-Pin 4 x 4 x 0.6 mm QFN
• 32-Pin 5 x 5 x 0.6 mm QFN

CY8C20x46:
• 16-Pin 3 x 3 x 0.6 mm QFN
• 24-Pin 4 x 4 x 0.6 mm QFN
• 32-Pin 5 x 5 x 0.6 mm QFN

CY8C20396: 24-Pin 4 x 4 x 0.6 mm QFN

CY8C20x66:
• 32-Pin 5 x 5 x 0.6 mm QFN
• 48-Pin 7 x 7 x 1.0 mm QFN (with USB)
• 48-Pin SSOP

[+] Feedback

This manual is related to the following products:
Table of contents