Canon Vb-C50fi - Manual (Page 98)

4-34
Setting Up Service
Set up the services to be performed in the schedules.
To open the settings screen for each service, in the
“Service” tab in the Schedule Setting screen, select the
service you want to set up, select a setting number and
click “Detail”.
There are 5 types of services you can set up.
● Timer: Performs picture recording at each specified time and records them in the device
(
→ P.4-39).
● Motion Detection: Where there is a variation in a part of a picture by the movement of an
object, the device performs picture recording (
→ P.4-41).
● Night Mode: Takes shots in dark conditions (→ P.4-52).
● External Input: Sets camera operation for external device input (→ P.4-54).
● External Output: Sets the output time to external devices and the repetition interval etc.
(
→ P.4-56).
Note
● Once the services have been set, click the “Save Settings” button on the Schedule
Settings screen to save the settings, and close the settings screen.
● You can also start up each of the service setting screens from the toolbar (→ P.4-
28). In such case, select a setting number in each service setting screen.
Schedule Setting Tool
“Service tab” in the Schedule Setting screen
Select the service you want to
make settings for, select a
setting number and click the
“Detail” button.