Canon Vb-C50fi - Manual (Page 79)

4-15
VB Administration
T
ools
Preset Setting Tool
t Preset Selection box
Select the preset to set or “Home”. “Home” is the setting for home position.
y “For picture recording only”
When this is checked, presets are used for picture recording only; when it is not checked,
presets can be used not only for picture recording but for the viewer as well. If you selected
“Home” in the Preset Selection box, this setting will be grayed out (setting not possible).
u Preset Name
A name can be assigned to the preset. If you selected “Home” in the Preset Selection box,
this setting will be grayed out (setting not possible).
i Camera Selection box
Select the camera to be used to apply preset settings.
o Camera Parameters
Enter the angle of view of the zoom you want to set in “Zoom”.
• Camera Angles
Pan ............. Sets the pan position of the camera.
Tilt .............. Sets the tilt position of the camera.
Zoom .......... Sets the zoom ratio (field of view angle).
* Pan position and tilt position cannot be set with the VB-C50Fi.
• Brightness
Sets the target value for the camera’s auto exposure feature. Select “Brighter” if the picture
is too dark due to backlight or other factors.
!0 “Get Value” button
When the Get Value button is clicked, the current angle of the camera selected at the VB-
C50Fi is retrieved as camera parameters.
!1 “Apply” button
Settings for current Presets and Tour Schedules are applied to the VB-C50Fi, and you can
proceed to the next Preset setting. At this stage, the edited settings are not yet saved to the
VB-C50Fi. Be sure to click the Save Settings button to save the settings to the VB-C50Fi.
!2 “Preview” button
The settings for camera parameters are reflected in the Preset Preview frame. The camera
zoom position for the VB-C50Fi also switches to this Preset and you can confirm from the
Admin Viewer.
!3 “Admin Viewer” button
This button can be used to start up Admin Viewer.
!4 Status List
Displays the results of communication between this tool and the VB-C50Fi. Warning messages
are displayed in blue and error messages are displayed in red.
Note
Edited content will not be reflected in the viewer accessed to the VB-C50Fi at the
stage when the Apply button is clicked. After confirming the edited content, be sure
to click the Save Settings button to save the settings to the VB-C50Fi.