Canon Vb-C50fi - Manual (Page 24)

1-8
MAC address
The MAC address is required
when setting the IP address
and making other network
settings. Please make a
note of it before installing
this unit (
→ P.2-8).
Reset switch
You can revert all settings of the unit to
the factory default settings by pressing
this button with a thin-tipped object while
turning on the power switch, and keeping
the button pressed for more than five
seconds after turning on (
→ P.7-10).
Serial No.
The serial number
for this unit is shown
here.
System Components and Their Operation
Rear
On the rear of the VB-C50Fi there are the MAC address required for network settings, a Reset
switch that returns the factory default settings and the serial number.
Power connection
socket
Multi-connector
You can connect the
Multi-Terminal Module
(VB-EX50) to the VB-
C50Fi via the connector
(
→ P.1-10).
100/10 BT Ethernet connector
(100Base-TX, 10Base-T Auto-Negotiation)
Screw hole for tripod
mounting
Bottom
Screw hole for arm mounting
Model Number
VB-C50Fi
NTSC xx-xxx
PAL xx-xxx