Canon Vb-C50fi - Manual (Page 32)

2-6
Turning the Power ON and OFF
The VB-C50Fi itself does not have a power switch. You can switch the VB-C50Fi on by plugging
the AC adapter into a wall outlet. The LED flashes when the VB-C50Fi is communicating. When
the power supply is turned ON, the LED momentarily flashes.
Note
● Wait at least 5 seconds before turning the power back on after shutting it off. Turning
it on too quickly may result in a malfunction. Observe the precautions given in “a
Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS” (
→ P.xii).
● If the picture recording function is being used, shutting off the power or
restarting the VB-C50Fi will cause all pictures to be deleted.
2. Connect the Camera to the Network
Next, connect the camera. Connect the camera to the network by connecting the camera and PC
via the hub with a LAN cable .
* Do not plug the AC cable power
plug into the wall socket yet.
Notebook
Hub
LAN cable
AC cable
AC adapter
(Rear of main unit)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The network connection is now complete.
AC cable
to AC outlet
AC adapter
Main unit