Canon Vb-C50fi - Manual (Page 35)

2-9
Setting Up
5. A setup progress window appears and
your settings will be saved.
Note
● Set the IP address to a value that suits your environment.
● Where the IP address has been automatically obtained from the DHCP server, you
cannot change the IP address setting from the VB Initial Setup Tool. If you wish to
change the IP address, change it from the Network Settings page (
→ P.3-6).
● Please consult with your network administrator for the IP address, subnet mask
and default gateway address settings.
● If 20 minutes or more passes after the VB-C50Fi is turned on, the VB-C50Fi stops
sending requests for IP addresses allocation and they cannot be detected using this
tool. If this occurs, restart the VB-C50Fi.
● To restore the factory default settings, refer to page 7-10.
● If you are using the Multi-Terminal Module and are changing the connection of the
VB-C50Fi and external camera, be sure to do this after having turned off the power
of these 2 devices. After changing the connection, turn on the external camera first
and then the VB-C50Fi.
3. Perform Initial Settings for the Camera
○ ○ ○ ○ ○ ○ ○ ○ ○
Initial settings are now complete.