Garmin GPS 65 - Manual (Page 53)

• The speed (SPD) field is highlighted. Enter tiie intended speed,
and press ENT.
• The fuel flow (Flow) field is highlighted. Enter the estimated fuel
flow followed by ENT.
• The GPS 6S will now display the calculated figures.
To perform a Trip and Fuel Plan for a route»
TRIP «( FUEL PLANNING
►WPTSi_
IdhlddMa-pGARHiH
SPD: 10“, Flow: 7
DTK lie* RED A.A
RKGe.31S.ETE 37:53
___ PREU AUX NEXT
Highlight the first cyclic field (top
left), and select *HTE’* with CLR.
Highlight the next Qrdicfield and
select the desired route number
by pressing CLR.
Hi^ight the *Leg>* field and select the desired leg, or select "All*
for the entire route, using CLR.
Hi^ili^t the field and enter the intended speed, followed
by ENT.
Hi^ili^t the *now:” field and enter the estimated fuel flow
followed by ENT.
The GPS 66 wiU now display the calculated figures.
6.12 MESSAGES
MESSAGES
Approaching GARMIH
Timer Expired
You may recall from Section 2.6
that some messages will remain on
the Message Page after being viewed.
When this occurs, the "MSG”
annunciatar remains on (but does
not flash) in the lower left comer.
To view these messages, select
"Messages” fiom the Auxiliary Page.
See Appendix A for a description of
available messages.
6-11