Garmin GPS 65 - Manual (Page 34)

CHAPTER 4
ROUTES
4.1 NAVIGATING USING ROUTES
POINT BUOY2
The GPS 65 offers a route navigation feature for you to navigate aloi^
a pre-defined sequence of waypoints.
The GPS 65 route capability allows you to create and store ten routes,
numbered 0 through 9, containii^ up to 20 waypoints each. Routes 1 to
9, the storage routes, can be activated to travel either in the order you
defined the waypoints or in reverse order. Route 0, the active route, is
the route you are navigating. The waypoint toward which you are
navigatii^is called Uie “active to” waypoint. The waypoint immediately
behind you is called the “active from” waypoint. The line that connects
the “active from” and “active to” waypoints is called the “active leg.”
The GPS 65 features automatic leg selection which will select the route
segment closest to your position as the active leg. The GPS 65 also
featiires automatic leg sequencing. As you pass a waypoint in the route,
the unit will automatically select the next waypoint as the “active to”
waypoint.
4-1