Garmin GPS 65 - Manual (Page 20)

The Waypoint List Page allows viewii^ of the stored waypoints in the
unit, liie list may be scrolled, with the arrow to view all the
waypoints. FVom this page, waypoints may be selected for deletion,
renaming, or to activate a direct GOTO. (See Section 3.7.)
3,5 WAYPOINT UST
CLIFF GARMIN
KRULL KVAP
MIDAMR MOB
RZRBCK WIDMER
WLDCAT WPTl
WPT2
__ amvmawMLisj
To delete a waypoint,..
* With the arrow keys, place the
cursor on the desired waypoint.
- Press CLR and ENT.
- The Confirmation Page is
displayed. Press ENT to confirm
or CLR to cancel.
NOTE: If you attempt to delete a proximity or route waypoint, a
message will be displayed. You must delete the proximity alarm or the
route before you can delete the waypoint.
To rename a waypoint.«
* With the arrow keys, place the cursor on the desired waypoint.
- Type in a new name for the waypoint and press ENT.
• The Confirmation Page is displayed. Press ENT to confirm the
name change or CLR to cancel.
3,6 AUTOSTORE
The AutoStore function allows you to capture your position at Uie
touch of a button for future reference. This function saves your current
position in a waypoint. Additionally, you may record your navigation
path by inserting the captured waypoints into a route (see Section 4.6).
The AutoStore'''*' Pг^ displays the waypoint name, captured position,
and optional stors^ route. An AutoStore waypoint name is pre­
assigned as a three digit number. You may change this to any name you
desire. Autostore''“ waypoints may be used for any waypoint operation
and wiU be part of the 250 available waypoints.
3-6