Xpres SubliJet IQ EPSON Stylus PRO 4880 (Windows Power Driver Setup): Power Driver Installation & Getting Started Guide - Manual (Page 46)

Sawgrass Technologies, Inc. SubliJet IQ ® Getting Started Guide for the EPSON Stylus PRO 4880
44
Supplies & Equipment
Contact your authorized reseller to purchase sublimation supplies and
equipment. For more information, see the Sublimation Supplies Directory
on our website at www.sawgrassink.com.
Operating Conditions
Certain environmental conditions should be taken into account for the
operation of SubliJet inks, including temperature and relative humidity.
ƒ
Supported Operating Conditions are 65° – 80° F with 40 – 60%
relative humidity
ƒ
Optimum Operating Conditions are 68° – 75° F with 40 – 60% relative
humidity
Storage
ƒ Care should be taken to prevent storing SubliJet below freezing
temperatures (32°F, 0°C). Do not expose SubliJet to extreme heat
(temperatures in excess of 104°F, 40°C). If SubliJet has been in
storage, you should allow it to reach room temperature before using it.
ƒ Do not expose SubliJet cartridges directly to light, especially sunlight,
for extended periods.
ƒ For best results, install your SubliJet cartridges by the date on the
cartridge. Please refer to the individual ink bag/cartridge for the
specific ink expiration date.