Xpres SubliJet IQ EPSON Stylus PRO 4880 (Windows Power Driver Setup): Power Driver Installation & Getting Started Guide - Manual (Page 10)

Sawgrass Technologies, Inc. SubliJet IQ ® Getting Started Guide for the EPSON Stylus PRO 4880
8
Installing SubliJet IQ™ Cartridges
If you are replacing existing cartridges because they are empty or low,
please see the following instructions. If not, go directly to step #1
1. Ensure the printer power is on. Press the ink compartment cover to
release the latch and open the cover.
When a cartridge is empty or low, INK LOW or REPLACE INK CART will display
on the LCD panel. Raise, then lower the ink levers on either side of the printer.
The ink indicator the LCD Panel will flash, indicating which cartridge is low or
empty. Be sure you have the correct color cartridge for replacement.
The LCD panel will indicate the ink colors of the original OEM ink configuration
and not the SubliJet XG8 configuration.
Do not install the Epson Inks provided with the
printer. Please call Sawgrass Technical Support if
you need assistance installing the SubliJet IQ inks.