Xpres SubliJet IQ EPSON Stylus PRO 4880 (Windows Power Driver Setup): Power Driver Installation & Getting Started Guide - Manual (Page 18)

Sawgrass Technologies, Inc. SubliJet IQ ® Getting Started Guide for the EPSON Stylus PRO 4880
16
Setup Instructions – Windows XP / Vista
Product Overview
PowerDriver XG
8
is a color management software solution that has been
written as a Windows printer driver. It is designed to work with Epson ink-
jet printers and Sawgrass sublimation ink. The installation program will
install Sawgrass color management software, the Sawgrass PowerDriver
XG
8
printer driver software, and ColorSure tools and utilities.
Quick Start
1. Unpack and set up printer as described in the Epson manual.
2. Install the Epson printer driver and verify printer operation.
3. Insert the PowerDriver XG 8 CD into the CD-ROM drive on the
computer and install PowerDriver.
Step By Step Installation
To get started printing as soon as possible, these are the steps
Sawgrass recommends you perform while setting up your sublimation
printer driver software.
1. Set up the printer according to the Epson instructions.
2. Install your Sawgrass SubliJet ink cartridges.
3. Install the Epson printer driver according to the Epson user’s
manual.
4. After the Epson driver is installed, check to see which port the
printer is set to:
a. In XP you can do this by clicking on Start > Printers and
Faxes. For XP with the Classic menu enabled, click Start,
Settings, Printers.
b. Right click on the Epson printer you just installed and click
on the Properties option.
c. Select the Ports tab and write down the port the printer is
assigned to. You may use this later in the PowerDriver
XG
8
software installation.