Tips for successful sublimation – Xpres SubliJet IQ EPSON Stylus PRO 4880 (Windows Power Driver Setup): Power Driver Installation & Getting Started Guide User Manual
Page 43

Sawgrass Technologies, Inc
.
SubliJet IQ
®
Getting Started Guide for the EPSON Stylus PRO 4880
41
Tips for Successful Sublimation
POLYESTER FABRIC
Maintain appropriate heat press times
Shortened pressing times will result in good surface color but the
sublimation dyes will not completely penetrate the polyester fibers. This
leaves the dyes more susceptible to wash out.
Longer pressing times will cause the dye molecules to penetrate deeper
into the fiber, creating a washed out look. For guidelines on transfer times,
see the section entitled Heat Transfer Instructions.
Maintain appropriate heat press temperatures and pressure
The correct temperature setting is vital for achieving desired results.
Higher temperatures can damage the polyester fibers to the point that they
cannot properly “hold” the dyes. For guidelines on transfer temperatures,
see the section entitled Heat Transfer Instructions.
Too much pressure on the heat press may cause the dyes to penetrate
too deeply into the fabric causing a washed out look. For guidelines on
transfer pressure see the section entitled Heat Transfer Instructions.
METAL
To obtain the best results when printing onto metal, place the transfer between
the metal and an absorbent cloth or fresh, non-textured paper towel. This will
absorb any dyes that pass back through the paper and any moisture released
during the transfer process. If you have problems with inconsistently filled
areas, this may alleviate the problem.
CERAMIC TILES & MUGS
When transferring onto ceramic tiles and mugs, immediately peel the paper off
of the ceramic after removing it from the heat press. Once the paper has been
removed, cool the ceramic by submerging it in cool water, or run water over it
from a faucet. If paper residue remains on the surface of the ceramic, clean
with citrus cleaner. If you experience a significant paper-sticking problem, call
your SubliJet reseller for assistance.