Xpres SubliJet IQ EPSON Stylus PRO 4880 (Windows Power Driver Setup): Power Driver Installation & Getting Started Guide User Manual

Page 12

Sawgrass Technologies, Inc.

SubliJet IQ

Getting Started Guide for the EPSON Stylus PRO 4880

5. Lower the ink levers to the locked position.

6. Close the ink compartment cover if you have
standard size ink cartridges installed. When
using extended size ink cartridges, the cover
will stay open. After all eight cartridges are
installed, lower the ink levers.

7. After approximately 1 minute, the ink lever messages will appear on the
LCD panel. The LCD will indicate that the printer recognized “NON-
GENUINE” ink cartridges.

8. Press the down key (V) until a message appears that asks the user
whether the ink cartridges are “NON-GENUINE”.

If the cartridge does not insert smoothly into
the slot, double check to make sure you
have the correct cartridge installed in the
correct slot. If the ink light remains on after
installing the cartridge, remove the cartridge
and reinsert to ensure it was fully placed in
the slot.