Welch Allyn Holter Software PCH100 and PCH200, LAN - Installation Guide - Manual (Page 7)

7
Before Installing
Overview: Please read the entire installation instructions before proceeding with the installation.
NOTE: Installation should only be completed by users with administrative privileges.
NOTE: Follow the steps below sequentially:
1. Determine Operating System and Service Pack
2. Install Holter application through step 2.7 (Refer to document 006-700-0075 WA Holter System Instruction Guide)
3. Install LAN Server
4. Setup Network Share
5. Configure Server
6. Add User(s)
7. Add Additional License
8. Installing the LAN Client
9. Connecting the LAN Client to the Server
10. Complete PCH100/200 Standalone Installation Check-off Sheet
11. Finished
1. Installation Checklist
Overview: The Installation checklist helps evaluate the PC system to determine which components are required. Steps are outlined
below:
The minimum Operating Systems and Service Packs are below. If your system does not have the following minimum requirements,
select an alternate system for installation.
Server
• Microsoft Windows 2003 Server
• Microsoft Windows 2008 Server
Client
• Microsoft Windows XP Operating System with, SP2 or higher.
• Microsoft Windows 2003 Server
• Microsoft Windows 2008 Server
• Microsoft Windows Vista (32 and 64 Bit)
9 Home Premium
9 Business
9 Enterprise
• Microsoft Windows 7 (32 and 64 Bit)
• Microsoft Windows 8 (32 and 64 Bit)
1.1 Determine Operating System and Service Pack
1. Go to My Computer.
2. View System Information. (You may upgrade Service Packs from Microsoft website at no cost.) – Note: this may take
several hours.
Enter OS Version: ______________________
Enter Service Pack Number (if applicable): ______________________