Welch Allyn Holter Software PCH100 and PCH200, LAN - Installation Guide - Manual (Page 10)

10
3.4 Permissions will have to be set for the folder.All users will need full access or a new user (WAHolter as an example) will need to be created.
Any user with access to this shared folder will require read and write privileges.
4. Configuring the Server
Overview:
•
Activate product
•
Log into application
•
Open LAN Configuration Settings
•
Enter Share path
•
Enter Username and password for Share path access
4.1 After the share folder and user settings have been enabled, start the application. The software will need to be activated before the LAN
system can be used. After activation continue to the log on screen. Default logon for the system is username = “Admin” password =
"Admin” (without quotes).