Inspection and start-up checklists, Receiving and inspecting, Handling and installing – Vintage Cellars Wine Guardian Ducted System Manual User Manual

Page 45: Starting-up the unit, Unit mounted on solid level surface, Proper electrical service provided, Hot water provided to humidifier, Drain lines and trap installed properly, Ductwork, fittings and grilles installed properly, All cold duct surfaces insulated

Inspection and Start-up Checklists

Receiving and Inspecting

� Unit received undamaged
� Unit received complete as ordered including accessories

�

Handling and Installing

� Unit mounted on solid level surface

�

� Sufficient space allowed for access to unit and accessories.

�

Proper electrical service

provided

�

� Hot water provided to humidifier

�

� Drain lines and trap installed properly

�

� Ductwork, fittings and grilles installed properly

�

� All cold duct surfaces insulated

�

� Low ambient control included if freezing condition present.

�

No obstructions to air

flow to condenser

�

Starting-up the Unit

� General visual inspection looks good.

�

All wiring connections checked

�

� All ducts, grilles and panels in place

� Start unit

�

� Check ducts and connections for air leaks

� Balance air distribution

�

� Confirm condenser airflow is unrestricted

� Verify cooling and heating operation

�

� Check for excessive noise or vibration