Rack mounting, Rack mounting -6 – Carrier Access Adit 3104 User Manual

Page 28

2-6

Adit 3104 - Release 1.6

Physical Installation

Rack Mounting

Rack Mounting

NOTE:

Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of

spacing is required above the Adit 3000 in the Rack Mount Unit.

To rack mount the Adit 3000, follow the instructions below:

1. Attach bracket ears to Rack Mounting Tray using four #10-32 x 1/4” screws on each side. The

Mounting Ears can be used for both a 19 or 23 inch rack. The drawing below shows a top view
of the 2 versions.

2. Attach the Rack Mounting Tray assembly (with mounting ears attached) to rack, using four

#10-32 x 1/4” screws (two on each mounting ear).

3. Remove wall mount and screws, if attached, from Adit 3000 unit.

Note: Adit 3000 and wall mounting bracket are not assembled from the factory.

23 in rack

19 in rack

Front

screws

Rack Mount Tray

Mounting Ear

Mounting Ear

Rack Mounting Tray