Torbal AGC Series Manual - Manual (Page 34)

Instruction Manual - TORBAL AGC Series
2. Commands Pe On and Pe OFF will be displayed sequentially. To enable percent weighing
press the “T” (YES) key when Pe On is displayed. If the function is already enabled and you
wish to disable it, press the “T” (Yes) key when Pe OFF is displayed.
3. After enabling percent weighing, DONE will be displayed, indicating that the function has
been enabled and it is ready to use. To use the function, follow the directions in Chapter 8. To
exit the mode menu use the “C” key.
(F) Totalizing
1. To enable totalizing press the “T” (YES) key when Total is displayed.
34