Torbal AGC Series Manual - Manual (Page 24)

Instruction Manual - TORBAL AGC Series
Important:
- The symbols for grams (g), kilograms (kg), carats (ct), pounds (lb), and Newton (n) will appear to the
right of the measurement on the LCD display.
- The symbols for grains (gn), ounces (oz), ounces troy (oz-t), and pennyweight (dwt) are printed on the
scale’s panel and an equal sign will point to the symbol indicating the current unit.
7.1.3.Mode configuration
TORBAL AGC series scales can operate in seven application modes. A- Animal Weighing, B –
Parts Counting, C - Check Weighing, D – Display Hold, E-Percent Weighing, and F-Totalizing. Before
an application mode can be used, it must be enabled and configured. Once the application mode is
enabled it will be available for selection from the Function Menu.
By factory default the scale is in the weighing mode (WEIGH). To enable other application
modes, follow the steps below.
24