Torbal AGC Series Manual - Manual (Page 31)

Instruction Manual - TORBAL AGC Series
3. After enabling check weighing, DONE will be displayed indicating that the function has been
configured and that the scale is ready for use. To use the function, follow the directions in
Chapter 8. To exit the mode menu use the “C” key.
(D) Display Hold
1. To enable display hold press the “T” (YES) key when Display is displayed.
2. Commands Di On and Di OFF will be displayed sequentially. To enable display hold and
proceed with configuration press the “T” (YES) key when Di On is displayed. If the function is
already enabled and you wish to disable it, press the “T” (Yes) key when Di OFF is displayed.
31