ThingMagic Universal Reader Assistant 2.6 - Manual (Page 9)

Starting URA
Universal Reader Assistant v2.6 User Guide 9
Starting URA
Main Window
Upon starting up URA you will see the main Tag Results screen as shown in Figure 1.
Figure 1: Startup Tag Results Screen
This screen contains the basic controls for reading, viewing and handling the Tag Results.
Across the top of the window are the following controls and status:
  Connect button - when clicked this will open the settings panel to the connect
section. Once in the connect section the reader to connect to, including
Networked Readers and Serial Readers can be specified and connected.
  Reader URI - Once connected this will display the URI of the active connection.
  LED and Status Message- show the status of the reader connection:
– RED - no connection to any readers
– YELLOW - Connection established to [Reader URI] and reader idle
– GREEN - [Reader URI] actively reading
 
[Read] - Once connected a Read button will appear.
 
Broom Icon - Clears the Tag Results display
  Disk Icon - Saves the tags shown in the Tag Results displayed to a file. If
specific tags are checked it will only save those tags.