Tag results grid, Save data – ThingMagic Universal Reader Assistant 2.6 User Manual
Page 16
Basic Reading
Universal Reader Assistant v2.6 User Guide
16
Tag Results Grid
As shown in Figure 5, the default displayed tag results show the following columns of
data:
# - The order each tag was read.
EPC - The EPC ID of the tag, typically 96-bits of data shown in Hex.
Timestamp - The timestamp when the tag was last seen during this query.
RSSI -
The receive signal strength of the tag response, in dBm.
ReadCount -
The number of times the tag was read on [Antenna].
In addition to the above fields, additional fields can be displayed using the
settings.
Clicking on a column header will reorder the displayed tags based on that field.
Save Data
Once reading is stopped and tags are displayed in the Tag Results Grid, the displayed
data can be saved to a file by checking the check-box in the far left column for each tag to
save; or leave them all unchecked to save all. Select the file to save the data to and click
Save
.