ThingMagic Universal Reader Assistant 2.6 - Manual (Page 23)

Settings/Status
Universal Reader Assistant v2.6 User Guide 23
Once enabled clients can connect to the specified port. A simple test client to use is a
telnet client. On Linux this can be invoked by simply entering:
$ telnet [IP address of URA host] 9055
Note
On Windows a telnet client applications such as putty or teraterm (both can be
found by running a websearch on their name). Follow each applications instructions
for connect a telnet client to
host: [URA host IP address]
port: 9055
With a client connected read output is now pending “Start Reading” being clicked. Starts
and stops of reading do not affect the port. Port is closed upon disconnecting from reader
or unchecking “Enable Data Extensions”.
When reading the Status bar will indicate a client is connected and data is streaming,
example above.
Figure 8: Data Extension Client Connected and Data Streaming Status
Figure 9: Data Extension Client Connected and Data Streaming Icon