Example – ThingMagic Universal Reader Assistant 2.6 User Manual
Page 26
Tag Operations
Universal Reader Assistant v2.6 User Guide
26
Example
The following shows a typical scenario of writing a tagʼs EPC ID using
selecting a specific tag:
1.
A Read operation was performed with an Embedded ReadData on the TID
memory bank resulting in the tags as shown in Figure 10.
Figure 10:
Tag Results - Tag Operation Workflow 2
2.
Right-click on the TID value and select WriteEPC. The tab will switch to the
WriteEPC tab with the Select criteria as shown in Figure 11. Since this tag was
read on Antenna 3, the write operation will be attempted on antenna 3.
3.
This tagʼs EPC ID was previously written with ASCII data so switching to ASCII
Text shows the ASCII interpretation of the raw data as shown in Figure 11.