Fault_gen2 protocol_non_specific_error - 42fh, Cause, Solution – ThingMagic Micro Hardware User Manual

Page 85: Fault_gen2 protocol_unknown_error - 430h

Protocol Faults

A D I V I S I O N O F T R I M B L E

Appendix A: Error Messages

FAULT_GEN2 PROTOCOL_NON_SPECIFIC_ERROR - 42Fh

Cause

This is an error returned by Gen2 tags. The tag does not support error specific codes.

Solution

Check the data that is being written and where its being written to in the command
resulting in this error. Try with a different tag.

FAULT_GEN2 PROTOCOL_UNKNOWN_ERROR - 430h

Cause

This is an error returned by Micro when no more error information is available about why
the operation failed.

Solution

Check the data that is being written and where its being written to in the command
resulting in this error. Try with a different tag.