Solution, Fault_gen2_protocol_memory_overrun_bad_pc - 423h, Cause – ThingMagic Micro Hardware User Manual

Page 84: Fault_gen2 protocol_memory_locked - 424h, Fault_gen2 protocol_insufficient_power - 42bh

Protocol Faults

A D I V I S I O N O F T R I M B L E

Appendix A: Error Messages

Solution

Check the data that is being passed in the command resulting in this error. Try with a
different tag.

FAULT_GEN2_PROTOCOL_MEMORY_OVERRUN_BAD_PC -

423h

Cause

This is an error returned by Gen2 tags. The specified memory location does not exist or
the PC value is not supported by the Tag.

Solution

Check the data that is being written and where its being written to in the command
resulting in this error.

FAULT_GEN2 PROTOCOL_MEMORY_LOCKED - 424h

Cause

This is an error returned by Gen2 tags.The specified memory location is locked and/or
permalocked and is either not writable or not readable.

Solution

Check the data that is being written and where its being written to in the command
resulting in this error. Check the access password being sent.

AULT_GEN2 PROTOCOL_INSUFFICIENT_POWER - 42Bh

Cause

This is an error returned by Gen2 tags. The tag has insufficient power to perform the
memory-write operation.

Solution

Try moving the tag closer to the antenna. Try with a different tag.