Solution, Fault_invalid_baud_rate - (10ah), Cause – ThingMagic Micro Hardware User Manual
Page 73
Common Error Messages
A D I V I S I O N O F T R I M B L E
68
Appendix A: Error Messages
Solution
Check the command being invoked against the documentation.
FAULT_INVALID_BAUD_RATE - (10Ah)
Cause
When the baud rate is set to a rate that is not specified in the Baud Rate table, this error
message is returned.
Solution
Check the table of specific baud rates and select a baud rate.