Rice Lake Valor 7000, Ohaus - Instruction Manual - Manual (Page 24)

EN-22
Valor™ 7000
Series
Alternate command
[Alt.CmM]
Define command character for the Print, Tare and Zero commands
Print
Set the alternate command character for Print
A to Z.
Tare
Set the alternate command character for Tare
A to Z.
Zero
Set the alternate command character for Zero.
A to Z.
End COM1, End COM2
[End]
Advance to the next menu or return to the top of the current menu.
4.9 Lock Menu
The Lock menu is a software controlled option which can lock menu settings to prevent
tampering. Default settings are bold.
Reset
[reset]
Reset the Lock menu to factory defaults.
NO = no reset
YES = reset
Lock Cal
[l.CAL]
Set the status.
OFF = Calibration menu is not locked
ON = Calibration menu is locked
Lock Setup
[L.SetuP]
Set the status.
OFF = Setup menu is not locked
ON = Setup menu is locked
Lock Read
[L.read]
Set the status.
OFF = Readout menu is not locked
ON = Readout menu is locked
Reset:
no
, yes
Lock Cal:
off
, on
Lock Setup:
off
, on
Lock Read:
off
, on
Lock Mode:
off
, on
Lock Unit:
off
, on
Lock Print:
off
, on
Lock COM:
off
, on
End Menu Lock: Exit menu