1 single weigh mode – Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) User Manual

Page 21

Operation

3.1 Single Weigh Mode

Standard weighing – pick up or deliver a single product and print weight ticket.
1. Select single weigh mode. See Section 2.2.10.
2. Enter product ID and customer ID if being used.

Operator can be changed at any time. See Section 2.2.8.

3. Insert ticket into the ticket printer.

4. Press .

The

920i will print:

Figure 3-3 Initial Ticket Printout

5. The 920i will go into net mode automatically when the start button is pressed.

The 920i display will show “0” weight with the NET mode illuminated.

6. Unload or load the amount as desired.

The delivery hoses, chutes, conveyors, etc. should be in the storage
position before pushing the end button.

7. When the displayed weight has stabilized, press

. The printer will print out

the amount unloaded or loaded.

Figure 3-4 Unloaded and Loaded Ticket Printouts

Note

Start

Rice Lake Weighing Systems
230 W Coleman St
Rice Lake, WI 54822
715- 234-9171

Truck ID: 1234567890
Operator ID: ABC123DEF123
Ticket ID: 0000001
05/14/2012 04:12 PM

Product ID: 1234567890
Customer ID:1234567890

Start at 11802 lb GROSS

0 lb NET

Note

End

0 lb NET

Amount Loaded

5670 lb

0 lb NET

Amount Unloaded

5670 lb