Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) - Manual (Page 18)

14 TradeRoute Operator’s Manual
2.2.8 Operator Setup
With the operator database turned on, the 920i will allow you to select an operator
name or number (up to 25 alphanumeric characters) during a weighing transaction.
You can store up to 50 operators in the standard electronic weigh center.
1. Press . Display will show .
• To turn Operator On/Off, press .
• To enter an Operator, press and enter information (see Section 2.2.2).
• To delete an Operator, press . A list of current operators will display. Use
the up/down directional arrows to select the operator to be deleted and press
. Press to return to previous menu.
Use to display other the pages if required.
2. Press to return to setup menu.
2.2.9 Container Setup
With the container database turned on and used in the pick up tare mode, the 920i will
allow you to select a container name or number with an associated tare weight value
(up to 25 alphanumeric characters) during a weighing transaction. You can store up to
50 containers in the standard electronic weigh center.
Only valid in Pickup Tare Mode.
1. Press . Display will show .
• To turn Containers On/Off, press .
• To enter a Container, press and enter container information
(see Section 2.2.2). After you press enter to accept, display will ask for a
container weight. Using the numerical keypad, enter the weight and
press .
Setup
Operator
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4 SOFTKEY5
Exit On/Off New Delete
On/Off
New
Delete
Exit
Note
SOFTKEY1 SOFTKEY2
Page up Page Down
Exit
Note
Setup
Container
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4 SOFTKEY5
Exit On/Off New/Edit Delete
On/Off
New