Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) - Manual (Page 20)

16 TradeRoute Operator’s Manual
3.0 Operation
Figure 3-1 Electronic Weigh Center
The electronic weigh center should be given at least 15 minutes to
warm up in cold weather before using.
When the truck is going to be shut down, power down the control box
prior to turning off the truck.
Raise the platform prior to turning the system on. The indicator
may reset itself if turned on prior to raising the platform and using
hydraulics.
Turn off the system prior to lowering the platform. The indicator
may reset itself if turned on prior to raising the platform
Figure 3-2 Pitch and Roll, Max 5.9°
1. Park truck on a level surface.
2. Raise scale platform into weighing position. LEDs on each side of the electronic
weigh center should flash when in weighing position.
3. Turn the electronic weigh center on by pressing power switch up (see Figure 3-1).
See following sections for weighing modes.
PRINT UNITS
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4
More=> Start
Last Weighment
Head Ct 0
Total Wt 0
Avg Wt 0
Current Weighment
Head Ct 0
Total Wt 0
Avg Wt 0
Totals:
Total Head: 0
Total Wt 0
Avg Wt 0
RICE LAKE
MODEL: 920i-20
SN: 1545613454
CLASS: III/IIIL/IIIHO
Nmax: 10 000
20 000
E
SCALE IS LEVEL Pitch = -0.0
Roll = -0.0
0
Scale
#1 Gross
lb
0
Directional
Arrows ON/OFF
Switch
Numeric
Keypad
Start/Stop
Buttons
Display
Screen
Ticket Printer
Note
Note
Important
Last Weighment Current Weighment Totals:
SCALE IS LEVEL
Pitch = -0.0
Roll = -0.0
0
Scale
#1
Gross
lb
0