Rice Lake TradeRoute HL Series - Low Profile Operators Manual for Models from 2011 and Older 127465 - Manual (Page 8)

5
mistake is made press the [CLEAR] button and start the
process over.
2. Enter the desired time into the indicator in HHMMSS (Hours
Minutes Sec) format using the key sequence outlined below.
The time must be in a 24-hour format. For example 1:15:10
PM (13:15:10) would be entered as:
Note: Press [8][0] [PRINT/SELECT] and the current
setting for the time is displayed in a HH.MM.SS format.
Pressing [PRINT/SELECT] or [CLEAR] will exit the date
programming mode without changing the settings. You have
an unlimited amount of time to enter the time keystrokes. If a
mistake is made press the [CLEAR] button and start the
process over.
3. To change the time format enter the following keystrokes:
will display the current setting.
There are three possible time settings;
sets the time to 24hr mode.
sets the time to 12hr AM mode.
sets the time to 12hr PM mode.
AM/PM mode is the current time of day when you are
entering the time.