Rice Lake TradeRoute HL Series - Low Profile Operators Manual for Models from 2011 and Older 127465 - Manual (Page 7)

4
Throughout this section, you will be asked to press the start or
end buttons, enter keystrokes into the indicator, or read the
display. At times, you must also recognise the mode in which the
unit is operating. The mode of the indicator is indicated by a
series of small lights below the display. (See Figure 2)
A description of the important keys and buttons are as follows:
Weigh Center [START] and [END] buttons.
Indicator [ZERO] Key
Indicator [TARE] Key
Indicator [PRINT/SELECT] Key
Setting Time and Date
1. Enter the desired date into the indicator in YYMMDD (Year
Month Day) format using the key sequence outlined below.
For example June 16, 2008 would be entered as:
Note: Press [8][1] [PRINT/SELECT] and the current
setting for the date is displayed in a YY.MM.DD format.
Pressing [PRINT/SELECT] or [CLEAR] will exit the date
programming mode without changing the settings. You have
an unlimited amount of time to enter the date keystrokes. If a