Rice Lake FX-i WP Series, A&D Weighing - Manual (Page 70)

68
AD-1683 DC static eliminator
Used to minimize weighing errors due to static electricity
on the material. The AD-1683 is direct-current static
eliminator. The ions generated produce no breeze and are
effective over a long distance. Therefore, the balance can
accurately weight powders, etc. by using the AD-1683.
AD-1684 Electrostatic field meter
This option measures the amount of the static charge on
the sample, tare or peripheral equipment and displays the
result. If those are found to be charged, discharge them
using the AD-1683 DC static eliminator.
AD-8920 Remote display
Connected to the FX-i WP series balance using the
RS-232C serial interface to display the weight data away
from the balance.
AD-8922 Remote controller
Connected to the FX-i WP series balance using the
RS-232C serial interface to display the weight data and to
remotely control the balance.
Analog output and comparator output available as an
option to be installed.
AD-8121B Printer
Compact dot-matrix printer
Statistical function, clock and calendar function, interval
print function, graphic print function, dump print mode
5 x 7 dots, 16 characters per line
Print paper (AX-PP143, 45 (W) x 50 (L) mm , ø65 mm)
AC adapter or alkaline battery.
Note
When connecting the remote display, remote controller,
or printer to the FX-i WP series balance using the cable
provided with each device, the balance does not comply
with IP65.