2 storing units – Rice Lake FX-i WP Series, A&D Weighing User Manual

Page 17

4-2 Storing Units

The units or modes can be selected and stored in the function table. The sequence of displaying the
units or modes can be arranged in the function table so as to fit the frequency of use.

Select a unit or mode and arrange the sequence of display as follows:

1 Press and hold the

SAMPLE

key until ba5fnc of the

function table is displayed.

2 Press

the

SAMPLE

key several times to display

Unit .

3 Press

the

key to enter the unit selection mode.

4 Specify a unit or mode in the order to be displayed using the

following keys.

SAMPLE

key

To sequentially display the units.

RE-ZERO

key To specify a unit or mode. The stabilization

indicator appears when the displayed unit or
mode is specified.

5 Press

the

key to store the units or modes. The balance

displays end and then displays the next menu of the function
table.

6 Press

the

CAL

key to exit the function table. Then the balance

returns to the weighing mode with the unit specified first in step 4.

Notes
When the power is turned on, the scale displays the unit specified first in step 4.
In the weighing mode, to select a unit or mode for weighing, press the MODE key.