Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Pass Plus Software - Manual (Page 30)

26
Body Pass Plus Software Program
7. After the logo is made, click on File —> Save in the menu bar on the upper left side of the logo marker
window then the logo is saved and converted to the image transmitted to the body composition analyzer.
8. Transmit the logo to the body composition analyzer by pressing the Transmitting Logo button in the logo
maker window, then the logo maker is closed and the transmitting logo file window appears. (Transmitting
logo file window also appears by clicking
Transmit Logo button in the menu buttons of the main screen.
When the logo transmission is complete, the body composition analyzer sends a completion message along
with an audible signal.
2.6 Transmitting Member
Transmit the information of the member who will be measured to the body composition analyzer. Click on the
member in the right hand side of the list of the main screen and press the
Transmit Member button to show the screen
(below). When the member transmission is complete, the body composition analyzer sends a completion message
along with an audible signal.