Rice Lake Counterpart Configurable Counting Indicator - User Manual Rev. D - Version 2.4 - Manual (Page 33)

Configuration 27
3.7 Setup Menu
The setup menu allows:
• Configuration of scale, features, serial port, Ethernet, print format, and digital inputs and outputs settings
• Viewing of the software and regulatory versions and reverting to default settings
.
ID DISPLAY TEST SETUP AUDIT CALIBR SETPTS
SCALES FEATURE SERIAL ETHERNET PFORMT
CONFIG
VERS DIGIO SETPTS
See
Figure 3-8
See
Figure 3-11
See
Figure 3-16
See
Figure 3-17
See
Figure 3-18
See
Figure 3-19
See
Figure 3-21
See
Figure 3-22
Figure 3-7. Setup Menu Layout
Table 3-6. Setup Menu Parameters
Menu Choices Menu Function
SCALES Configuration Configure and calibrate scales.
FEATURE Feature Set passwords, keyboard locks, regulatory mode, and initial consecutive number value, count
function, and define softkeys.
SERIAL PORT 1
PORT 2
PORT 3 (Option
Card) Configures the communications ports.
ETHERNET Ethernet Configures the Ethernet port.
PFORMT Print Format Set print format used for header, gross, net, count, pallet, setpoint and total ticket formats.
See Section 6.0 on page 72 for more information.
SETPTS Setpoints Configure setpoints.
DIG IO Digital IO Assign digital input/output functions.
VERS Version Display installed software version and regulatory version numbers.
The Reset Config softkey on the Version menu can be used to restore all configuration
parameters to their default values.