Rice Lake 920i Installation Manual V3.08 - Manual (Page 65)

Print Formatting 59
Truck ID number TRWIN, TRWOUT
Gross weight for current ticket in displayed units
Tare weight for current ticket in displayed units
Net weight for current ticket in displayed units
NOTE: TR1, TR2, and TR3 truck ticket weight data includes keywords INBOUND, KEYED, RECALLED, as necessary.
Setpoint Commands
Setpoint captured value SPFMT
Setpoint number
Setpoint name
Setpoint mode (gross or net label)
Setpoint preact value
Setpoint target value
Auditing Commands
Last calibration date All
Number of calibrations
Number of weighments since last calibration
NOTES:
Last calibration date () and number of calibrations () are updated whenever WZERO, WVAL, WSPAN, or REZERO
are changed.
Number of weighments ( command) is incremented whenever the scale weight exceeds 10% of scale capacity. Scale
must return to gross or net zero before the value can be incremented again.
Formatting and General-Purpose Commands
<nnn> ASCII character (nnn = decimal value of ASCII character). Used for
inserting control characters (STX, for example) in the print stream. All
Time
Date
Time and date
Unit ID number (up to 8 alphanumeric characters)
Consecutive number (up to 7 digits)
Insert header format 1 (HDRFMT1); see Table 6-2 on page 60
Insert header format 2 (HDRFMT2); see Table 6-2 on page 60
Carriage return character
Line feed character
nn> New line (nn = number of termination ( or )
characters)*
nn> Space (nn = number of spaces)*
Toggle weight data format (formatted/unformatted)
NOTE: * If nn is not specified, 1 is assumed. Value must be in the range 1–99.
User Program-dependent Commands
nn> Insert user print text string (from user program, SetPrintText API) All
x> Invoke user program print handler x (PrintFmtx) AUXFMTx
Command Description Supported Ticket Formats
Table 6-1. Print Format Commands (Continued)