Rice Lake 920i Installation Manual V3.05 - Manual (Page 43)

Configuration 37
STREAM OFF
LFT
INDUST
4KEYS
KEYPAD
DISPLAY Specifies what data, if any, is streamed from the port.
4KEYS and KEYPAD stream keypad events to a receiving indicator. KEYPAD transmits all
keypad events; 4KEYS transmits keypresses of the ZERO, GROSS/NET, TARE, and UNITS
keys only.
DISPLAY streams the complete display image to the receiving indicator in local/remote
indicator configurations. See Section 10.5 on page 106 for more information.
NOTE: Streaming is not supported for RS-485 connections.
SOURCE source_scale If STREAM is set to a value other than OFF, SOURCE specifies the source scale for data
streamed from the port.
SFMT format Specifies the stream format used for the streamed data (SCALE or IND SC scale types). The
default format is the Consolidated Controls format (see Section 10.8 on page 113). See
Section 10.6 on page 107 for information about custom stream formatting.
Level 4 Submenus RS-485 Port Information
DUPLEX HALF
FULL Specifies whether the RS-485 communications is half- or full-duplex.
ADDRESS 0
0–255 Specifies the decimal indicator address for RS-485 connections. RS-232 communications is
disabled if an address other than zero is specified for this parameter. RS-485 addresses must
be in the range 01–255.
SERIAL Menu
Parameter Choices Description
Table 3-6. Serial Menu Parameters (Continued)