Rice Lake 920i Installation Manual V3.05 - Manual (Page 11)

Introduction 5
Option Cards
Table 1-4 lists the available
920i
option cards. Any of
the listed option cards can be installed in Slot 2 of the
CPU board or in any available slot of an attached
expansion board.
Expansion Boards
Table 1-5 lists the expansion boards available for the
panel mount and wall mount enclosures. The panel
mount enclosure can accommodate a single 2-card
expansion board; the wall mount enclosure supports
either a 2-card or a 6-card expansion board. Any of
the available option cards can be installed in any
available expansion board slot.
A second two- or six-card expansion board can also be
connected to the 920i , providing up to 14 option card
slots. Consult factory for details. See Section 2.5 on
page 12 for detailed information about slot and serial
port assignments for expanded system configurations.
Relay Options
8-, 16-, and 24-channel relay racks are available for all
920i systems. Relays can be installed internally in the
wall mount enclosure; all other models require an
external enclosure for the relays. Consult factory for
details.
DC Power Supplies
Two DC power supplies are available for mobile 920i
applications:
PN 97474, 9–36 VDC supply
PN 99480, 10–60 VDC supply
Consult factory for more information.
Outdoor Display
An optional display, PN 100759, is available for
applications requiring use of the
920i
in bright, sunlit
environments. Consult factory for details.
1.5 Summary of Changes
Principal changes for Version 3.05 for the
920i
indicator include the following:
• Support for local/remote indicator configurations
provides function equivalent to a legal-for-trade
remote display with keypad for truck scale and
similar applications. See Section 10.5 on
page 106 for more information.
• The description for setting rate of change (ROC)
parameters has been changed. See Table 3-3 on
page 27 for details.
• New values have been added to the STREAM
parameter on the SERIAL menu to allow
streaming of keypad events to another indicator
(4KEYS, KEYPAD) and, for the local/remote
function, to send the complete display image
(DISPLAY). See Section 3.2.2 for more
information.
• Reprinting of any previous print transaction is
now supported by the alibi feature. The feature is
enabled using the ALIBI parameter on the
FEATURE menu; print transactions can be
recalled by assigning an
Alibi
softkey, also
configured using the FEATURE menu (see
Section 3.2.3 on page 38).
• New IMAGE parameter on the FEATURE menu
allows inversion of the display image
(blue-on-white or white-on-blue) for support of
the outdoor display option. See Section 3.2.3.
• Display and printing of audit trail information is
described in Section 10.11 on page 116.
Option Card PN
Single-channel A/D card 68532
Dual-channel A/D card 68533
Analog output card 67602
Dual serial port expansion card 67604
24-channel digital I/O expansion card 67601
1MB NV RAM memory expansion card 67600
Pulse input card 67603
Ethernet communications card 71986
EtherNet/IP communications card 87803
DeviceNet interface card 68541
Allen-Bradley Remote I/O interface card 68539
Profibus DP interface card 68540
Analog input card with thermocouple input 87697
Table 1-4. Part Numbers for 920i Option Cards
Expansion Board PN
Two-card expansion board for panel mount
enclosure, slots 3–4. Includes 2-inch, 34-pin
ribbon cable and power supply cable. 71743
Two-card expansion board for wall mount
enclosure, slots 3–4. Includes 24-inch, 34-pin
ribbon cable and power supply cable. 69782
Six-card expansion board for wall mount
enclosure, slots 3–8. Includes 16-inch, 34-pin
ribbon cable and power supply cable. 69783
Table 1-5. Part Numbers for 920i Expansion Boards