Rice Lake 920i Custom Grain Program - Manual (Page 6)

Weigh 3
Key in the foreign material percentage
followed by the
Enter key.
8. The operator is prompted to Enter% Moisture .
Figure 2-6. Percent Moisture
Key in the moisture percentage followed by
the
Enter key.
9. The 920i prompts the user with the following
message;
Figure 2-7. Contract Message
Use the Yes or No softkeys to enter. If the
operator presses the No softkey, the weigh out
ticket is printed. If the Yes softkey is pressed
then the operator is prompted to Enter
Contract Number .
Figure 2-8. Enter Contract Number
10. The operator keys in the contract number
followed by the Enter key. If the contract
number is found, the weigh out ticket is
printed with the contract information. If the
contract number is not found, then the 920i
prompts
On Fly Enter Contract ID .
11. The operator enters the contract number
followed by the Enter key. The indicator
prompts,
Enter Amount Required .
12. The operator enters in the required bushels for
the contract followed by the Enter key.
13. The weigh out ticket with the contract
information is printed.