Rice Lake 920i Custom Grain Program - Manual (Page 11)

8 920i Grain Program
4.1.1 Adding a Grain
1. To add a grain to the database, press the Add
Grain softkey. The indicator prompts, Enter
Grain number .
Figure 4-3. Enter Grain Number
2. Key in the grain number followed by the
Enter key. The indicator prompts, Enter
Divisor .
Figure 4-4. Enter Divisor
3. Key in the divisor and press the Enter key.
The grain is now stored in the database.
4.1.2 Removing a Grain
1. To remove a grain from the database, press
the Remove Grain softkey on the indicator.
The indicator prompts, Enter Grain ID to
Delete .
Figure 4-5. Grain ID to Delete
2. Key in the grain ID followed by the Enter key.
The grain is then removed from the database.
4.1.3 Clear All Totals
1. To clear all the totals from the grain database,
the operator presses the Clear All Totals
softkey. The indicator prompts, Clear Grain
Totals with Yes or No softkeys.
Figure 4-6. Clear Grain Totals
2. Press the Yes softkey to confirm that all grain
totals have been deleted, or press No softkey
to return to the grain softkeys.
4.1.4 Print All Grain Totals
1. Press the Print All Totals softkey shown in
Figure 4-1 to print a grain report. The
following example grain report is shown
below.
Figure 4-7. Grain Report
2. To view an individual grain, the operator
presses the A d d G r a i n softkey and the
indicator prompts, Enter Grain No.
3. Key in the known grain number followed by
the Enter key. The 920i displays the grain
information.
4. If the operator presses the Print key, an
individual grain report is printed.
5. If the operator presses the CLR key, the total
for that individual grain is cleared.