Rice Lake 920i Custom Grain Program - Manual (Page 12)

Supervisor Mode 9
4.2 Editing Contracts
Press the Edit Contracts softkey on the 920i to access the editing grains parameters. The following edit grains
parameters are listed below.
• Add Contract
• Remove Contract
• Clear All Tables
• Print All Tables
4.2.1 Add Contract
1. To add a contract to the database, press the
Add Contract softkey. The indicator prompts,
Enter Contract Number.
Figure 4-8. Enter Contract Number
2. Key in the contract number followed by the
Enter key. The indicator prompts, Enter
Contract Req’d Amount.
Figure 4-9. Contract’s Required Amount
3. Key in the amount of bushels required for the
contract, press the Enter key and the contract
is stored.
4.2.2 Deleting a Contract
1. To delete a contract from the database, press
the Delete Contract softkey on the indicator.
The indicator prompts, Enter Contract # to
Delete .
Figure 4-10. Contract Number to Delete
2. Key in the contract number to delete followed
by the E n t e r key. The contract is then
removed from the database.
4.2.3 Clear All Totals
1. To clear all the totals from the contract
database, the operator press the Clear All
Totals softkey. The indicator prompts, Clear
Contract Totals? with Yes or No softkeys.
Figure 4-11. Clear Tables
2. Press the Yes softkey to confirm that all
contracts have been deleted, or press the No
softkey to return to the contract softkeys.
4.2.4 Print All Totals
1. Press the Print All Totals softkey to print a
contract report. The following example