Rice Lake 920i FlexWeigh Systems - 201/202 - Manual (Page 24)

20 System 201/202 Basic Filler
3.13 Zero Tolerance Weight
The weight under which the system considers the scale to be empty and allow a new batch to begin.
Note
If a password is in the system, see Section 3.4 to enter the setup menu.
Prior to entering a new value, the existing value needs to first be cleared by using the clear key.
1. From the main setup menu screen, press More=> twice to access the third menu screen.
2. Press Zero Toler Weight .
Enter Zero Tolerance Weight
=> 110.00
08/27/2012 02:15PM SCALE #1
000.0 SCALE
#1
Gross
Lb
Target Dribble Preact Ingredient Name
0.50 lb 0.00 lb 0.04 lb Ingredient 1
Consecutive Nbr Near Zero Formula Name Batch Total
9 0.04 lb Grout 0.00 lb
Home Exit Cancel
Figure 3-14. Enter Zero Tolerance Weight
3. Enter the zero tolerance weight using the numeric keypad.
4. Press Enter save value.
3.14 Modifying the Discharge Option
Note
If a password is in the system, see Section 3.4 to enter the setup menu.
Prior to entering a new value, the existing value needs to first be cleared by using the clear key.
1. From the main setup menu screen, press More=> four times to access the next menu screen.
2. Press Discharge Option .
3. Press Discharge Enabled or Discharge Disabled . System will toggle between the two modes of operation:
- Enabled: 920i System 202, system controlled discharge at batch complete.
- Disabled: 920i System 201, External provided method to empty scale at batch complete.