Rice Lake 920i FlexWeigh Systems - 201/202 - Manual (Page 23)

Enter Delay After Disch (sec):
=> .30
0
PT
08/27/2012 02:15PM SCALE #1
End
SCALE
#1
Gross
Lb
Home Cancel
Program: Express 201/202 PN126057 Ver 1.00
ID #1 (Disabled)
ID #2 (Disabled)
Dual Speed Enabled
Auto Print Disabled
Delay After Discharge (sec) :3.0
Zero Tolerance Weight: 0.04 lb
Discharge Option Disabled
SETUP MENU
0.00
Softkey Setup 19
Figure 3-12. Delay After Discharge
3. Using the numerical pad, enter in the time in seconds to delay after completion of a discharge before a new
start input will be allowed.
4. Press Enter.
3.12 Test Digital IO
Note
If a password is in the system, see Section 3.4 to enter the setup menu.
1. From the main setup screen, press More => twice to access the third setup menu screen.
2. Press Test Digital IO to test the Zero Tolerance , Fill Complete , Ingredient relay outputs.
- Pressing a softkey once will turn on the output and pressing it again will turn off the output.
- Pressing Exit will turn off ALL outputs.
Ing 2 Fast Fill
08/27/2012 02:15PM SCALE #1
Ing 1 Fast Fill More=> Exit
Fill
Complete
Ingredient 1 Fast Fill
Ingredient 2 Fast Fill
Ingredient 3 Fast Fill
Ingredient 4 or 2 Slow Fill
Ingredient 5 or 3 Fast Fill
Ingredient 6 or 3 Slow Fill
Ingredient 7 or 4 Fast Fill
Ingredient 8 or 4 Slow Fill
Start
Resume
Reset
Stop
Zero Tol
Fill Cmplt
Discharge Enabled
Discharge Input
Discharge Output
Figure 3-13. Test Digital IO