Replacing bulbs for front lamps – Mercedes-Benz E-Class 2007 Owners Manual User Manual
Page 447

446
Practical hints
Replacing bulbs
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:
ț
Additional turn signals in the exterior
rear view mirrors
ț
High mounted brake lamp
ț
Bi-Xenon* lamps
ț
Front fog lamps
ț
Rear lamps (except license plate
lamps)
ț
Front side marker lamps
Replacing bulbs for front lamps
1 Housing cover for low beam halogen or
Bi-Xenon* headlamp
2 Bulb socket for high beam head-
lamp/high beam flasher bulb
3 Bulb socket for parking and standing
lamp bulb
4 Bulb socket for low beam headlamp
bulb (halogen headlamps only)
5 Bulb socket for turn signal lamp bulb
Before you start to replace a bulb for a
front lamp, do the following first:
̈
Turn the exterior lamp switch to
position
M (
̈
Open the hood (
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
Warning!
G
Do not remove the cover
1 for the
Bi-Xenon* headlamp. Because of high volt-
age in Bi-Xenon* lamps, it is dangerous to
replace the bulb or repair the lamp and its
components. We recommend that you have
such work done by a qualified technician.