Mercedes-Benz E-Class 2007 Owners Manual - Manual (Page 40)

39
Getting started
Unlocking
SmartKey with KEYLESS-GO*
If the SmartKey with KEYLESS-GO is inside
the vehicle, pressing the KEYLESS-GO
start/stop button on the gear selector le-
ver corresponds to turning the SmartKey
to the various starter switch positions.
If you firmly depress the brake pedal dur-
ing pressing the KEYLESS-GO start/stop
button, the engine starts automatically.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the brake pedal.
Position 0
Before you press the KEYLESS-GO start/
stop button, the vehicle’s on-board elec-
tronics have status 0 (as with SmartKey re-
moved).
Position 1
̈ Press KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, such as seat adjustment. i The function of the SmartKey overrules the
KEYLESS-GO function.
i If you now press the KEYLESS-GO
start/stop button
ț once again, the ignition (position 2) is
switched on
ț twice, the power supply is again switched off