Mercedes-Benz E-Class 2007 Owners Manual - Manual (Page 164)

163
Controls in detail
Control system
NAV* menu
The NAV menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until you see the message NAV in the
multifunction display.
ț If COMAND is switched off, the mes-
sage
NAV off appears in the multifunc-
tion display.
ț With COMAND switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveled on appear in
the multifunction display.
ț With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND manual for in-
structions on how to activate the route
guidance system.
Distronic* menu
Use the Distronic menu to display the cur-
rent settings for your Distronic system.
What information is shown in the multi-
function display depends on whether the
Distronic system is active or inactive.
Please refer to the “Driving systems” sec-
tion of this manual (
୴ page 252) for in-
structions on how to activate Distronic.
̈ Press button è or ÿ repeatedly
until you see one of the following two
pictures in the multifunction display.
i Level of information displayed will vary de-
pending on the information contained on the
MP3-CD insert in the single CD player of the
COMAND system.
To select a MP3-CD from the CD changer maga-
zine, press a number on the COMAND system
key pad located in the center console.